DC high power adjustable constant current power supply
Product Description:
Input voltage: 7V-36V
Output voltage: 1.5-35V can be adjusted continuously (only used as a buck module, and input must be greater than 1.5V).
Output current: adjustable, maximum 10A (recommended in 8A, 5A or 70W below room temperature can naturally heat dissipation, please strengthen heat dissipation when exceeding. It is recommended to add a small fan! Constant current needs more than 2V of output voltage to regulate, and current regulation will only work under constant current condition.
Output power: maximum 150W (recommended for use in 100W, large differential pressure, please reduce power).
Working temperature: -20~+75 degree (pay attention to power tube temperature when using, exceed heat dissipation).
Working frequency: 300KHz
Conversion efficiency: maximum 95%
Short circuit protection: constant current with constant current.
Input back protection: no
Output reverse flow: No, for charging, please add a diode. This shop is sold!
Installation mode: upper and lower two acrylic plates, 8 copper pillars, 8 3mm wires, and easier to install in turn when installing keys.
Connection mode: terminal or welding terminal, IN as input and OUT
as output.
Module size: L80mm*W 53mm *H35mm
Weight: 132g
Setting instructions:
Set the key to set the display mode. There are three kinds of display modes.
1, F-0 mode: display the output voltage;
2, F-1 mode: display the input voltage;
3, F-2 mode: alternately display the input and output voltage;
Instructions: according to the "set" key, circular display three display modes, the corresponding indicator light will be bright or extinguished, press "confirm" key to save and exit, and separate the backlight of the LCD screen according to the "confirm" key.
Product Tags:
|
|
Small DC DC Power Supply / Adjustable Constant Current Power Supply GTK-C2B3 Images
|
